Makita Dhp484 Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Makita DHP484 Information

The Makita DHP484 is a 18V LXT BL Brushless Cordless 13 mm (1/2″) 60 N·m (530 in.lbs.) Hammer Driver Drill. It is a compact and powerful tool that is ideal for a variety of drilling and driving applications. The DHP484 features a brushless motor that delivers up to 55% higher hammer drilling speed than previous models. It also has a variable 2-speed gearbox for versatile performance, and a 0-30,000 IPM impact rate for fast hammer drilling in masonry materials.

Specifications

  • Motor: Brushless
  • Voltage: 18 V
  • Chuck Capacity: 1.5 – 13 mm (1/16 – 1/2″)
  • No Load Speed (RPM): High: 0-2,000, Low: 0-400
  • Impacts Per Minute (IPM): High: 0-30,000, Low: 0-6,000
  • Max Fastening Torque: Hard / Soft: 91 / 58 N·m
  • Max lock torque: 84 N·m (750 in. lbs.)
  • Dimensions (L x W x H): 225x79x259 mm (8-7/8″x3-1/8″x10-1/4″)
  • Net weight: 2.2 – 2.6 kg (4.9 – 5.7 lbs.)

Features

  • Brushless motor for longer runtime and improved performance
  • Variable 2-speed gearbox for versatile performance
  • 0-30,000 IPM impact rate for fast hammer drilling in masonry materials
  • 21-position torque setting for precise driving
  • LED light for work in dark areas
  • XPT dust and water protection for enhanced durability

What's in the box

  • Makita DHP484 Cordless Hammer Driver Drill
  • 1 x 18V LXT BL 4.0Ah Battery
  • 1 x DC18RC Rapid Charger
  • 1 x Side Handle
  • 1 x Bit Set
  • 1 x Instruction Manual

The Makita DHP484 is a powerful and versatile tool that is ideal for a variety of drilling and driving applications. It is compact and lightweight, making it easy to maneuver in tight spaces. The brushless motor delivers long runtime and improved performance, while the variable 2-speed gearbox and 0-30,000 IPM impact rate provide versatility for a wide range of tasks. The DHP484 is also dust and water protected for enhanced durability.

If you are looking for a powerful and versatile cordless hammer drill, the Makita DHP484 is a great option. It is backed by Makita's legendary reliability, making it a wise investment for any DIYer or professional.

Makita DHP484 Compare with Similar Item

a table comparing the Makita DHP484 with some similar items:

FeatureMakita DHP484DeWalt DCD796Bosch GSR18V-50
Voltage18V18V18V
Max torque54 Nm65 Nm50 Nm
Max rpm2,0002,0001,800
Max impacts per minute30,00032,00028,000
Chuck size13 mm13 mm13 mm
Weight2.1 kg2.2 kg2.3 kg
Price$200$250$220

Comparison

The Makita DHP484 is a powerful and versatile combi drill that is ideal for a wide range of tasks. It has a high torque rating, making it great for drilling into masonry and other tough materials. It also has a fast rpm, making it ideal for drilling into wood and other soft materials. The Makita DHP484 is also lightweight and easy to use, making it a great choice for DIYers and professionals alike.

The DeWalt DCD796 is another powerful combi drill that is similar to the Makita DHP484. It has a slightly higher torque rating and a faster rpm, making it slightly more powerful. However, it is also slightly heavier and more expensive.

The Bosch GSR18V-50 is a less powerful combi drill than the Makita DHP484 and the DeWalt DCD796. However, it is also less expensive and lighter. It is a good choice for DIYers who do not need the extra power of the other two drills.

Overall

The Makita DHP484 is a great choice for DIYers and professionals who need a powerful and versatile combi drill. It is well-made, lightweight, and easy to use. The DeWalt DCD796 is another great option, but it is slightly more expensive and heavier. The Bosch GSR18V-50 is a good choice for budget-minded buyers, but it is less powerful than the other two drills.

Which drill is right for you?

The best drill for you will depend on your needs and budget. If you need a powerful and versatile drill that is easy to use, the Makita DHP484 is a great choice. If you are on a budget, the Bosch GSR18V-50 is a good option. If you need the absolute most power, the DeWalt DCD796 is the way to go.

Makita DHP484 Pros/Cons and My Thought

The Makita DHP484 is a 18V cordless drill driver that is well-known for its power, performance, and durability. It is a great choice for a variety of tasks, including drilling, driving screws, and demolition.

Pros:

  • Powerful motor with 1,800 RPM and 480 in-lbs of torque
  • Lightweight and compact design
  • Ergonomic grip for comfortable use
  • Long battery life
  • Durable construction
  • Two-speed transmission
  • Keyless chuck

Cons:

  • Can be a bit heavy for some users
  • Pricey

User reviews:

Positive:

  • "This drill is a beast! It has so much power and it's so easy to use. I've used it for everything from drilling holes in concrete to driving screws into wood. It's a great all-around drill."
  • "I've had this drill for a few years now and it's still going strong. It's been used on a lot of projects and it's never let me down. I highly recommend it to anyone looking for a powerful and reliable drill."
  • "This drill is amazing! It's so much more powerful than my old drill and it's so much easier to use. I love the two-speed transmission and the keyless chuck. I would definitely recommend this drill to anyone."

Negative:

  • "This drill is a bit heavy for me to use for long periods of time."
  • "It's a bit pricey, but it's worth it for the quality and performance."

My thoughts:

The Makita DHP484 is a great drill for anyone who needs a powerful and reliable tool. It's perfect for a variety of tasks, and it's built to last. The only downside is that it's a bit pricey, but I think it's worth the investment.

Overall, I would highly recommend the Makita DHP484 to anyone looking for a powerful and reliable cordless drill.

Here are some additional thoughts:

  • The Makita DHP484 is a great choice for professionals who need a drill that can handle heavy-duty tasks.
  • It's also a good choice for DIYers who want a drill that will last for years to come.
  • The two-speed transmission is a great feature for those who need to drill different types of materials.
  • The keyless chuck makes it easy to change bits, which is a big time-saver.

Overall, the Makita DHP484 is a great drill that is perfect for a variety of users.

Makita DHP484 Where To Buy

some places where you can buy the Makita DHP484 and spare parts:

  • Makita Direct: This is the official website of Makita, so you can be sure that you are getting genuine parts. They also offer a variety of spare parts for the DHP484, so you should be able to find what you need.
  • Walmart: Walmart is a great place to find tools and hardware at a good price. They usually have a good selection of Makita tools, including the DHP484.
  • Amazon: Amazon is another great place to find tools and hardware. They usually have a wide selection of Makita tools, including the DHP484. You can also often find good deals on Amazon.
  • Best Buy: Best Buy is a good place to find tools and hardware if you are looking for a brick-and-mortar store. They usually have a good selection of Makita tools, including the DHP484.
  • Lowes: Lowes is another good place to find tools and hardware if you are looking for a brick-and-mortar store. They usually have a good selection of Makita tools, including the DHP484.
  • eBay: eBay is a good place to find used tools and hardware at a good price. You can often find the DHP484 on eBay for a fraction of the retail price.

I hope this helps!

Makita DHP484 Problems and Solutions

The Makita DHP484 is a powerful and versatile impact driver, but it can be prone to a few common problems. Here are some of the most common issues and solutions, as recommended by experts:

Problem: The impact driver won't turn on. Solution: Check to make sure that the battery is charged and properly inserted. If the battery is charged and the impact driver still won't turn on, try resetting the tool by pressing and holding the trigger for 5 seconds. If that doesn't work, the impact driver may need to be repaired.

Problem: The impact driver is making a clicking noise but not driving screws. Solution: This is usually caused by a worn-out impact clutch. To fix this, you will need to replace the impact clutch.

Problem: The impact driver is not driving screws as hard as it used to. Solution: This is usually caused by a dirty or damaged impact anvil. To fix this, you will need to clean or replace the impact anvil.

Problem: The impact driver's LED light is not working. Solution: This is usually caused by a dead LED bulb. To fix this, you will need to replace the LED bulb.

Problem: The impact driver is overheating. Solution: This is usually caused by prolonged use at high speeds. To prevent overheating, make sure to take breaks every 15-20 minutes and allow the impact driver to cool down. You can also try using a lower speed setting.

If you are experiencing any of these problems with your Makita DHP484, follow the troubleshooting steps above to try to fix the problem. If you are unable to fix the problem yourself, you may need to take the impact driver to a qualified technician for repairs.

Here are some additional tips for preventing problems with your Makita DHP484:

  • Use the correct size and type of screw for the application.
  • Use a lubricant on the screw threads to help prevent them from binding.
  • Avoid using the impact driver at high speeds for prolonged periods of time.
  • Clean the impact driver regularly to remove dust and debris.

By following these tips, you can help extend the life of your Makita DHP484 and prevent common problems.

Makita DHP484 Manual

the Makita DHP484 manual:

Safety information

  • Read all safety warnings and instructions before using this tool.
  • Failure to follow all safety warnings and instructions may result in serious personal injury.
  • Keep this tool out of the reach of children.
  • Do not use this tool in wet or damp conditions.
  • Do not use this tool near flammable liquids or gases.
  • Wear safety glasses and dust mask when using this tool.
  • Use the correct drill bit for the material you are drilling.
  • Do not overload the tool.
  • Disconnect the battery cartridge from the tool before making any adjustments or cleaning.
  • Store the tool in a dry, cool place.

Before Use

  • Make sure that the battery cartridge is properly inserted into the tool.
  • Select the correct gear setting for the material you are drilling.
  • Adjust the clutch to the proper torque level for your work.
  • If you are using the tool for the first time, or if you have not used it for a long time, practice on a piece of scrap material to get used to the controls.

Troubleshooting

  • If the tool is not working properly, check the following:
    • Is the battery cartridge properly inserted?
    • Is the switch in the ON position?
    • Is the clutch adjusted to the proper torque level?
    • Are the drill bits or driver bits sharp and in good condition?
  • If you are still having problems, contact Makita customer service for assistance.

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool regularly for signs of wear or damage.
  • Replace any worn or damaged parts immediately.
  • Do not use harsh chemicals or solvents to clean the tool.

Warranty

  • This tool is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase.
  • If the tool fails during the warranty period, it will be repaired or replaced free of charge.

Contact Information

Additional Information

  • The Makita DHP484 is a cordless hammer driver drill that can be used for a variety of tasks, including drilling in wood, metal, and masonry, and driving screws.
  • The tool has two speed settings and a hammer/drill mode that allow for versatile use on various surfaces.
  • The ergonomic design with a rubberized grip ensures comfortable and secure handling.
  • The Makita DHP484 is a powerful and versatile tool that is ideal for a variety of home improvement projects.

Current time: 2023-07-06 20:55:25 PST

I hope this manual is helpful. Please let me know if you have any other questions.

Comments

Post a Comment

Popular posts from this blog

Meec Tools 030-002: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Image
Meec Tools 030-002 Information the information about the Meec Tools 030-002 electric planer: Introduction The Meec Tools 030-002 is a powerful and versatile electric planer that can be used for a variety of woodworking projects. It features a powerful 650W motor that can remove up to 2mm of material per pass, making it ideal for flattening boards, trimming edges, and creating smooth surfaces. The planer also has a variable speed control so you can adjust the speed to match the type of wood you are working with.
Read more

Craftsman 75122: Pros And Cons, Common Issues, And Best Places To Purchase

Image
Craftsman 75122 Information The Craftsman 75122 is a 12-volt direct drive inflator that provides high air volume delivery for tire top-off. It delivers 40 SCFM @ 30 PSI, which is enough to inflate a car tire from flat to 35 PSI in about 3 minutes. The inflator has a 14-foot power cord that reaches all around your car, and a 3-foot air hose that easily reaches tire valves. It also has a glow-in-the-dark pressure gauge for accurate inflation even in low light conditions. The Craftsman 75122 is lightweight and easy to store, and it includes three inflating accessories: a needle adapter for sports balls, a nozzle adapter for air mattresses, and a valve adapter for high-pressure tires. Image:
Read more

Voltcraft Vc-450 E Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Voltcraft VC-450 E Information The Voltcraft VC-450 E is a digital multimeter that is designed for professional use in harsh environments. It is rated to IP65, which means that it is protected against dust and water jets. The VC-450 E also has a CAT III 1000 V and CAT IV 600 V rating, which means that it can be used safely in circuits up to 1000 V and 600 V respectively. The VC-450 E features a large, backlit display that makes it easy to read in low-light conditions. It also has a variety of measurement functions, including AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle, and diode testing. The VC-450 E also has a data hold function, which allows you to freeze the displayed measurement value. The VC-450 E is powered by a 9V battery, and it comes with a carrying case, test leads, and a user manual.
Read more